page 5
Attaching the walker’s rear wheels
Attaching the walker’s anti-fall blocks
The footpad
4. Insert the two rear wheels into each
round hole on either corner at the rear
of the walker, ensuring the small plastic
block (A) is seated in its hole.
Tip:
Use the provided wheel pusher tool
to press the wheels in (tap the back of
the wheel pusher lightly with a hammer if
required)
A
5. With the baby walker still upside down
and fully folded down, place the anti-
fall blocks around the walker as shown,
inserting the two plastic stems on each
block into the holes on the walker’s
underside.
ATTENTION!
Ensure the narrow end of
each block points to the corner of the
walker.
WARNING! DO NOT USE THE WALKER
WITHOUT THE ANTI-FALL BLOCKS ATTACHED
6. The footpad must be fitted in the rocker
mode, and for those times when you
don’t want your child to travel anywhere
in the walker.
Attach using the six clips on the footpad
and hook over the side bars on either side
of the base.
