MXN MXN-HD8DVRQ, Инструкция по эксплуатации

Страница: 25 / 38

System Setting
How to use the product
Speed Switch Setup
Speed Switch On/Off.
Frequency Setting : 10~200 Hz.
Caution : Speed switch On, [Menu] button and [Setting] button, you will operate.
Speed Switch Display
Under Freq. : Select the normal screen or Cam1~4 screen or SPLIT1~3.
Over Freq. : Select the normal screen or Cam1~4 screen or SPLIT1~3.
Over Freq. Display : Select the LCD on or off
Factory Default
Modified values on the Setup page are initialized to the original factory values.
The system is rebooted after initializing.
Firmware Upgrade
Firmware is upgraded.
A file to be updated must be saved in No.1 SD Card and then updated.
During updating of the product, do not pull the SD card out nor turn the power off.
If you pull the card out or turn the power off while updating, it may cause an error
or failure of the product or performance.
Shutter Camera
No shutter/heater : Use the normal camera.
Shutter/heater by Power ON : Use the normal camera & shutter camera
Shutter/heater by Trigger : Only Use the shutter camera
Trigger 4 Recording
Screen Only : Only the Trig.4 Screen
Event Rec. : Event Recording.
Sys-Info.
The Firmware version and model name of the product are displayed.
Caution : Do not forget to click [OK] button to save modified settings.
2
4
Available to set per channels.