MXN MXN-HD8DVRQ, Инструкция по эксплуатации

Страница: 21 / 38

How to use the product
Screen Position Setup
As shown in the below picture, you can designate the location of images on the multi
screen for each camera. [See picture]
Ch.4, 5 Change : If you choose Option #5 camera for the location of images taken
by No.4 camera, the cameras will be switched as you input. The basic input is Cam.4
but images taken by Cam.5 will be displayed when you choose Cam.5.
RearView Trigger Setup
Images taken by cameras that detected trigger signals, (1) can be displayed on the
multi screen, or (2) only one image can be displayed on the full screen.
Just as at Screen Position Setup, other cameras can be chosen for each trigger than
the camera which was numbered identically with the trigger though the basic input
is Trigger #1/CAM1, Trigger #2/CAM2, and Trigger #3/CAM3 and Trigger #4/CAM4.
Border Line Setup
Thin : Border lines between the screens of multi channels are illustrated in a thin line.
Thick : Border lines between the screens of multi channels are illustrated in a thick line.
None : No border lines between the screens of multi channels are displayed.
Parking Lines Setup
Display : Parking lines are displayed on the screen of the channel which detected
trigger 1~4 signals.
Calibration : Location of the parking lines is adjusted.
Thin : Parking lines are illustrated in a thin line.
Thick : Parking lines are illustrated in a thick line.
Ref. : Parking lines are displayed only when the channel which detected trigger
signals is shown in full-screen mode.
Dimmer
On : Brightness of the screen is automatically adjusted to brighter or darker by detecting
the brightness of outside the car through sensitivity sensor on the front panel.
Off : The brightness that was set on the [Screen Adjustments] menu is maintained.
Trigger Delay Time
Trigger 1~4 signals delay time of 0-9 seconds is set.
Album
When On is chosen, photos in the album will be displayed after 30 seconds.
When you set up time for slide shows, the photos will be displayed in consecutive order.
Photos in the album should be saved in No.1 'Album' folder of the SD card via the
computer. If Off is chosen, no album will be executed.
Caution : Do not forget to click [OK] button to save modified settings.
20
SPLIT
Configure the screen of SPLIT 1 / 2 / 3
The selected SPLIT modes are displayed at "Speed switch CH selection" and
"Screen switch button selection".