System Setting
- 8 -
2. TRIGGER SETTING
* NOTE
2. TRIGGER SETTING
TRIGGER1
SOURCE
SOURCE: [CAM1 => CAM2 => SKIP]
DELAY:[0~20SEC]
Trigger1,2
UP/DN
User can use 2 triggers and each trigger source (CAM1,2) can be selected.
When the trigger is activated, the selected source's image is displayed.
Each trigger's delay time is adjustable from 0 sec to 20 sec.
selecting
option setting
exit
2
Trigger1,2
UP/DN
DELAY
UP/DOWN
SOURCE
selecting
shifting
option srtting
2
- Source select, Delay time setting and MARKER ON/OFF are only available
with (SELECT) key.
- If one trigger is actviated by an intermittent signal (e.g. from an indicator
light) the delay must be activated to prevent the picture from flickering.
- Trigger1 has higher priority than Trigger2.
So, in case Trigger1 and Trigger2 are activated by DC Voltage signal at the
same time, then picture via Trigger1 will be displayed.
[CAM 1
]
[02sec
]
DELAY
MARKER
[A;B;OFF]
MARKER
SETTING
