MXI Security stealth key m200, Быстрый старт

Страница: 8 / 13

Getting Started
Stealth Key M200 Quick Start Guide 8
5 When the small bullet is completely inside the larger barrel, the loop is secure and ready for
use.
To remove the lanyard loop
1 Turn the barrel (counter-clockwise) to loosen the small bullet.
2 When the small bullet is completely separated from the larger barrel, pull the lanyard loop
apart.
Personalizing a device
When you plug in a new device, you must personalize it before you can use the authentication
and private partition features. The device uses pre-installed ACCESS Standard software to
guide you through the personalization process. ACCESS Standard starts automatically when
you plug in a new (or recycled) device. If autorun is not configured for your computer, you can
start ACCESS Standard from the application partition on the device.
Personalizing a device involves three main steps:
1 Applying a device profile —The profile sets default preferences for the device. You can
choose the Typical profile, with preconfigured device settings, or the Custom profile that
allows you to configure device settings. The Typical profile contains the following device set-
tings:
• Authentication method: password authentication
• Number of device users: 1 (not including the Administrator)
• Private partition uses the total available disk space
• Minimum password length: 6
• Password Retry Limit: 10
• Password Re-use Threshold: 3
• User Rescue: Enabled
• Data Destruction: Off
• Administrator Account: Enabled
2 Creating the Administrator account —Only the Administrator can perform certain opera-
tions on a device, such as adding, removing, and rescuing users. During the personalization
process, the Administrator account is created automatically when you set the Administrator
password. If you choose a Custom profile and disable the Administrator account, you will not