7
Modification reserved
•
19, rue de Rennes
•
BP 83221 • F - 35690 ACIGNÉ
2.
USAGE REGULATION
2.1
The front linkage is designed for implements which comply with the hitching dimensions defined in standard ISO 8759-1
for
category
II.
The distance of the implement’s hitch points must be
825 mm (dimension A) with a linkage pin of 28 mm
diameter.
The vertical height of the implement must be 610 mm
(dimension H).
2.2
Implement/link point distance and ground work.
The hitched implement must be fixed as close as possible to the hook-up points on the front linkage. In actual fact, the greater
the front overhang, the higher the stresses on the front linkage (leverage). The more compact the implement fixing, the less
strain there is on the equipment. Use of a compact implement also improves the lifting performances.
For pushing work (implements of the soil decompaction or dozer blade type for instance), it is strongly recommended that
a push bar be fitted to reinforce the tractor from the front linkage to the rear trumpet housings.
Caution!
Recommendations for fixing the implement, and working on the ground, must be strictly complied with. Any deviation
from the requirements described above may cause serious damage, for which MX cannot be held liable.
Hitching an implement on which dimension ‘H’ is less than that shown places excess strain on the top link and may
damage it.
Hitching an implement with a dimension greater than H can damage the front of the tractor (bonnet, front guard,
etc.) during the lifting operation.
