background image

CAUTION

Check there are no hidden cables or pipes before drilling holes for wall plugs.  

Exercise great care when using power tools near water.  

The use of a residual current device (RCD) is recommended.

!

!

!

!

11. FITTING THE RISER RAIL AND HANDSET 

1.  

Establish height of riser rail to suit users 

requirements (Fig 1).

2.  Remove end bracket cover, to explore fitting 

point from upper of lower brackets (Fig 2).

3.  Drill and plug the wall and fix the lower bracket 

without the rail locator notch. Fit rail through 

lower bracket. Place the remaining bracket on 

top of the rail making sure the slot in the rail is 

located into the bracket notch. Ensure the hole 

position is vertically aligned and mark the wall. 

Remove the rail then drill and plug the wall.

4.  With the handset height adjuster on the left hand 

side, fit the soap dish, then hose retaining ring 

onto the bottom of the rail assembly (Fig 3).

NOTE: The soap dish in this kit is supplied 

with fittings to fit both oval and round rails it is 

assembled with a rubber insert for the oval rail 

and must be changed to the round one which is 

provided. 

5.  Replace the rail assembly on to the lower  

bracket refit the top bracket ensure the slot or 

indent in the rail is located into the bracket notch 

and fix to the wall.

6.  To fit the handset, connect one end of the double 

interlock hose to the outlet on the mixer valve, 

making sure that the sealing washer is in place. 

7.  Screw the remaining end of the double interlock 

hose to the handset making sure the sealing 

washer is in place, then locate the handset into 

the handset height adjuster (Fig 4).

NOTE: It is the conical end of the double interlock 

hose which grips into the handset height adjuster.  

The handset will not fit in the height adjuster without 

the double interlock hose attached.

TIPS

•    A piece of insulating or masking tape applied 

to the wall before marking out the fixing 

holes will help stop the drill from wandering, 

particularly on tiled surfaces. 

!

!

1

2

3

4

Содержание Atmos Fusion

















Отзывы: