19
Modification reserved
•
19, rue de Rennes
•
BP 83221 • F - 35690 ACIGNÉ
Check the following each month, and more frequently when used intensively:
– Condition of the loader articulations. If necessary, replace the wear bushes and/or the pins.
The wear bushes must be replaced if they are less than 1 mm thick.
– The tractor’s hydraulic oil level and the sealing of the hydraulic system. If you notice any internal or external leaks on
the hydraulic parts (rams, hoses, connectors, Mach, couplings, etc.), contact your dealer.
– Condition of the hoses: replace them if you notice any small cracks or oil seepage.
– Correct operation of the monolever (cables, play, locking, etc.).
– Condition of the electric wiring. Please contact your dealer if there is any damage to connectors or cables.
– Mechanical condition (any cracking, deformation, fretting on stops, play, parking stands, etc.). Please contact your
dealer if there is any abnormal wear.
Check the tightness of the bracket after 10, 50 hours then every 100 hours or when carring out tractor maintenance. In case of
untightness, please contact your dealer.
IMPORTANT
:
All the screws needing to be retightened must be inspected, changed if necessary, cleaned and smeared with loctite.
Tighten the screws to the tightening torque specified in the table below.
Use of a pneumatic spanner to tighten the screws on the tractor is forbidden.
Tightening torque (Nm)
15. TRACTOR MAINTENANCE
Pour les opérations d’entretien et de réglage du tracteur, il est vivement conseillé de dételer le chargeur.
Le dételage du chargeur est une opération simple et rapide qui offre les meilleures garanties de sécurité et d’efficacité pour
l’entretien du tracteur et du chargeur.
Close
the tap fitted on the lifting coupler.
Thread
Class of bolt
8.8
10.9
12.9
M 8
21
29
35
M 10
42
58
70
M 12
72
101
121
M 14
114
160
193
M 16
174
245
295
M 18
240
340
405
M 20
340
475
570
M 22
455
640
765
M 30 x 150
500
M 40 x 150
500
For any maintenance operations made whilst
the loader is the raised position, the loader
must be locked into position
