Mx Onda MX-CP2396, Инструкция по эксплуатации

Страница: 17 / 30

17
(Fig. 4). The average value of all the results which is measured
from 5 o’clock
to 9 o’clock in last 7 days in the current user memory zone. The average value
of all the results which is measured from 18 o’clock to 20 o’clock in last 7 days
in the current user memory zone
Press the M button for the fourth time to access the different memory
locations, press repeatedly to check all the memory positions of the selected
user. In any of the cases mentioned above the screen will show the stored
values; Maximum tension (systolic), minimum tension (diastolic), pulse and
condition according to the classification criteria of the World Health
Organization.
Notes:
The memories will remain stored even when the device does not have the
batteries installed.
If there are no stored measurements, the display will show the digits "
0
".
At any time you can exit memory mode by pressing the
“ ” button, or allow
1 minute to pass without pressing any button
Deleting measurements from the memory
To clear all memory locations, access the memory and then press and hold
the
M button for three seconds.