Mx Onda MX-CP2396, Инструкция по эксплуатации

Страница: 15 / 30

15
6. If you want to make a new measurement, you must turn off and on the
appliance again, but keep in mind the following suggestions:
After carrying out the blood pressure measurement, if you want to make
a new measurement in the same person you should wait for 3 to 5
minutes, so that the blood circulation returns to normal. This time varies
according to each person.
The blood pressure values depend on many factors, so it is not possible
to provide a valid diagnosis by virtue of a single measurement. For this
reason, by measuring the blood pressure regularly, a more complete
follow-up of the patient can be carried out.
TURN OFF
To turn off the blood pressure monitor press the
“ ”
button. However, once
the measurement is completed, the appliance will automatically turn off after 1
minute.
Note: It may happen that the device shuts down if it is close to equipment
that generates interference or electrostatic discharge.
READING MEMORY RESULTS
This device has four independent memories ( , , and ) for four
different users and up to 30 measurements are stored in each memory. The