![MWS MulchMaster HM46 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/mws/mulchmaster-hm46/mulchmaster-hm46_operation-manuals_1861126008.webp)
Icons
Warning Symbols on the
Mower
Observe all warning labels on the mower itself. They are found in
highly visible locations on the exterior covers. Replace any worn-out
labels.
Meaning of warning labels:
1. WARNING!
Read the operation manual before starting and heed all
warnings.
2. WARNING!
Unauthorised persons prohibited from access and use. No
persons other than the operator are permitted in the work
area. Keep away from animals.
3. WARNING!
Shut off engine and remove spark plug cap before working
on cutter. Tilt the mower forward from the rear to conduct
maintenance work. Wait until the blade comes to a complete
stop. A rotating cutter is extremely dangerous. The cutter
may continue to rotate after shutting off the engine.
4. WARNING!
Keep hands and feet clear of the cutting tool. Never place
hands or feet under the protective cover. Extremely
dangerous!
Basic Safety Instructions
These safety instructions apply universally to the use, care and
maintenance of the mower. They should always be observed and
are only generally listed here.
Prior to Start-up
Please observe each time before starting up:
Read the operation manual (also for the engine) and keep in an
accessible place.
Check your mower for damages or leaks around the tank and
the engine.
Check the fuel and oil levels and add appropriate amounts and
grades as needed. Add fuel only in open spaces. Never smoke
while refuelling. Keep fuel and oil only in approved containers.
Ensure that filler caps for fuel and oil are tightly closed before
starting the engine.
Never exceed the MAX capacity for oil. Check the oil level
regularly. It should always be above MIN.
Change the oil after every 25 operating hours.
Do not refuel:
While the engine is running.
While the engine is warm.
Adjust the cutting height before starting the engine.
Check the following items before the first mowing:
The cutter is tightly fastened.
The handlebar and connections are tight.
The cables and controls are functioning properly.
GB
5
Operation Manual
HM / PM - 01/08
1
2
3
4