Icons / Description
Never transport the mower while the engine is running.
Remove the cutting tool blocks only when the engine is inactive
and the spark plug cap is removed.
Park the mower in buildings/enclosed areas only after the engine
has cooled.
Keep the air intake for engine cooling clean.
Shut off the engine immediately:
If you must leave the mower.
If you are distracted by other events and your alertness is
impaired.
If the mower runs rough after blocking the blade (vibration or
irregular idling).
If you perceive unusual noises coming from the engine of the
cutting tool.
If the safety equipment does not function normally.
In these cases it is necessary to have the mower checked at your
garage in order to ensure further safe operation.
5 Description
Setting Grip Handle
0
01
0
(see p. II)
1. Park the mower on an even surface.
2.
Adjust the handle bar (1) to your height and lock it in place (see
4). Keep an eye on the cables as you unfold it, so that they do
not get pinched.
3.
Lock the handle bar by pressing the eccentric lever (3) on the
bar (eccentric lever grips should point up).
Hanging Starter Coil
0
02
0
(see p. II)
Hang the cable for the starter coil (14) in the available cable holder
(11) on the handle bar (1).
GB
7
Operation Manual
HM / PM - 01/08
