Phase and analog mixer with external sound card
1. Connect the Phase Receiver to a power source for power it on (computer, power outlet...)
2. Connect the Phase Receiver to your sound card through the line outputs using RCA cables
3. Place the Phase Remotes on top of your records. You are now all set and can use Phase!
How long does the battery last?
Once Phase is fully charged, you’ll be safe for around 10 hours. And it takes 2 hours to recharge the Remote.
How to turn on Phase?
To turn Phase on just connect the Receiver to a computer or other external power via its USB slot.
What type of records can I use with Phase?
Any! Phase does not read the record; it only detects and captures your turntable’s rotation. You could use
Phase without a record at all.
How do I know when a Remote battery is empty?
Little lighted dots on the Phase Receiver indicate the battery level for each Remote (A and B). In addition, the
LED of your Remote will flash red when the battery is running out.
How does Remote pairing work? (For when you have more than 2 Remotes).
1. Place the Phase Remote you want to pair onto one of the Phase Receiver docks
2. Long press the corresponding Setup button on the Phase Receiver (A or B): the LED of your Phase Remote
will start flashing
3. When the LED stops flashing your new remote is paired with the Receiver
Please note, only one Remote can be paired to each Receiver dock at a time.
With which software can I use Phase?
Phase was designed to work with any software that uses DVS technology (e.g. Serato, Traktor, Rekordbox,
Virtual DJ). Note that Phase has natively been configured to work with Serato DJ. If you are using a different
DJ software, you will have to select it in the MWM configuration software to configure your Phase.
How do I recharge the Remotes?
Make sure the Receiver is plugged in and powered. Then simply put the Remotes on the Receiver docks.
They will automatically begin charging.
Is Phase sensitive to external disruptions (like rumble for example)?
Phase completely overrides any form of external disruption (rumble, defective equipment...etc.). There is no
risk to erode the signal anymore, because the signal is digitally generated by Phase.
Will I need to buy additional cables or anything else?
Everything you need will be provided with Phase. You will find in the box: 1 USB power cable to charge and
power the receiver, 2 RCA cables to plug Phase into your DVS setup, and 4 magnetic stickers to maintain the
remotes on your records.
How do I make sure to maintain the Remotes on the record?
Phase Remotes have a little notch that allows you to fix them on your turntable’s spindle just like you do with
your records. The underside surface is also magnetic, so you just have to stick one of the magnetic stickers
(comes in the box with Phase) on your record, put the Remote on your record, and let physics work its magic!