20
EN
M1.1.PS3000.NLFREN - 16092021
14.
It is strictly forbidden to connect welding machines whose power is more than 2.5KW to AC 220 V output port in the front
panel of this power station. There is a DC 48 V power supply port at the back panel of this power station. Our 48V DC
welding machine can be connected to the 48V output port in the back panel of this power station to do manual welding
job by using electrodes.
15.
This power station can not be connected to another power station to create higher output power because it may cause
damage and safety accidents. Please strictly use this power staton according the described functions and user guidelines.
4.2 Battery use instructions
1.
The battery and charger should be kept away from water, fire, inflammable and explosive materials, avoid strong shaking,
bumping and short circuits. The battery and charger should be protected from direct sunlight, pay attention to ventilation
and heat dissipation;
2.
Do not disassemble the battery and charger
3.
It is forbidden to use metal to directly connect anode and cathode short-circuit;
4.
Please use the original battery charger to charge the power station in order to guarantee battery safety and battery life
4.3 Charger use instructions
1.
The charger is only used indoors, please protect it when outdoor use!;
2.
When the user needs to charge, please firstly connect the charger output port to battery charging port and then connect
charger AC input plug into the AC220V socket. The charger will starts charging and indicator light will flash or the light will
be onIt is forbidden to use metal to directly connect anode and cathode short-circuit;
3.
After the battery is fully charged, the full-charged indicator light will be always on.
4.
If the user needs to use the power station after battery is fully charged or not fully charged, please disconnect the AC power
cord and charging connection cord at the two ends of charger, then the power station can be used.
4.4 External equipment use
When using the inverter function, make sure that the appliances are turned off and then insert the electrical plug of appliance
into the AC 220V output socket in the front panel of power station. Then user can turn on the switch of appliances and start to
use appliances. When powering and using the appliances by inverter function, please do not turn off the switch of the power
station. User must turn off the appliances firstly and then turn off the power station.
