11
EN
M1.1.WEL9-WEL15.NLFREN - 25042019
2 Introduction
• Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building
sites or greenhouses depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating
elements. The thermostat feels the air temperature and controls the surrounding temperature. The fan motor is controlled by
thermostat and it stops working when the thermostat cuts off the heating element, and the self-resetting thermal cut-out will
switch off the heater to ensure the safety when overheating.
•
When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after
a short time. The heating element is made of stainless steel and was coated with protection oil by production. The smoke is
caused by the left oil when heated.
3 Technical specifications
Model
WEL9
Waterproof class
IPX4
Voltage
380 - 400 V
Required power
9000 W
Current
13.0 - 13.6 A
Required fuse
16 A
Setting
52 / 4500 / 9000 W
Self-resetting thermostat
40 °C
Product dimensions (l x w x h)
355 x 300 x 490 mm
Net weight
9.6 kg
• Housing of steel plate and coated by heat-resistant powder.
• Supplied with industrial socket installed in the heater. Need additional coupler when use for WEL9.
2
heating elements. The thermostat feels the air temperature and controls the
surrounding temperature
.
Non-self-reset thermostat will switch off the heater by
overheating to ensure the safety.The fan motor is not controlled by thermostat,
when the thermostat cuts off the heating element the ventilator keeps working on.
2.2
When using the heater for the first time, you may notice a slight emission of
smoke. This is quite normal and it stops after a short time. The heating element is
made of stainless steel and was coated with protection oil by production. The
smoke is caused by the left oil when heated .
3. Technical specifications
Model IFH03-90-G
Waterproof Class
IPX4
Voltage
380-400V 3~
Required power
9000W
Current 13.0A~13.6A
Required Fuse
16A
Setting 52/4500/9000W
Self-resetting
Thermostat
40°C
Product meas
(mm)
355x300x490
N.W.(KG) 9.6
3.1
Housing of steel plate and coated by heat-resistant powder .
3.2
Supplied with industrial socket installed in the heater. Need additional
coupler when use the heater for IFH03-90.
3.3
Instructions of coupler for IFH03-90:
Figure 1
1. Five pins connector 380V/415V 50/60Hz
2. Power cord
3. Five pins plug 380V/415V 50/60Hz IPX4
3.4.1
The user should use the bought power coupler as showed in the figure. The
Figure 1
• Instructions of coupler for WEL9:
1. Five pins connector 380/415 V 50/60 Hz IPX4
2. Power cord
3. Five pins plug 380/415 V 50/60 Hz IPX4
• The user should use the bought power coupler as showed in
figure 1. The coupler should match with the appliance and earthing
prolong. The coupler should be VDE approved. The length of the
power cord can be more than 1.8 m but less than 3 m, if the power
cord is too long and heavy, it can cause the fall off the coupler,
electric shock risk or tripping over of child.
• When you connect the power connector with the appliance, open
the lid along with the arrowhead pointed direction,pay attention to
the direction. (Figure 2)
•
After use, shut down the appliance firstly, pull out the plug, then put
off the position pin and remove the coupler.
3
coupler should match with the appliance and earthing prolong. The coupler should
be VDE approved. The length of the power cord can be more than 1.8m but less
than 3m, if the power cord is too long and heavy, it can cause the fall off the
coupler, electric shock risk or tripping over of child.
3.4.2
When you connect the power connector with the appliance, open the lid
along with the arrowhead pointed direction,pay attention to the direction.
Figure2
3.5
After use shut down the appliance firstly, pull out the plug, then put off the
position pin and remove the coupler.
4. Description of Control Panel
IFH03-90-G
4.1 Left Knob:
selector with heat setting
4.2 Right Knob:
Thermostat dial
5. Special safety regulations
5.1
Before use, please check the marking on the power cord. Depending on the
power cord type this appliance may be used in different ambient conditions
Type
You can use the appliance in
Do not use in
H07RN-F
household, warehouses and
workshops, building sites or
greenhouses
5.2
When using electrical appliance basic precautions should always be followed
including below:
5.2.1
The fan heater is not suitable for use outdoors in damp weather, in
bathrooms or in other wet or damp environments.
5.2.2
Please note that the fan heater can become very hot and should, therefore,
Figure 2
copyrighted
document
- all
rights
reserved
by
FBC
