background image

4

  Safety 

Pre

cautions

  Safety 

pre

caution symbols are shown to

 help

 prevent 

accidents

 from

 the

 

incorrect  

use of this product

.Make sure to understand the

 

 following 

symbols and their meanings before continuing.

Danger

Warning

Warning

Caution

Failure to comply with the warning listed below may result 
in death, serious injury or fire

.

Failure to comply with the warning listed below may result 
in death, serious injury or fire.

Failure to comply with the warning listed below may result 
in personal injury or property damage.

Do not touch

Make sure to unplug the power cord

Make sure 

unit is connected

 

to a grounded outlet

 

Do not disassemble

Risk of electric shock

※ Personal injury: Any injury or burn requiring long-term outpatient treatment for full recovery.
※ Property damage: Damage to one's property such as 

a building

 or f

urniture.

※ Label: Attached to the product containing a warning. If the

 label 

is damaged or not clearly

visible, make sure to contact 

your dealer or

the customer service center.

Each of following symbols has the meaning listed next to it.

◆ Make sure to use 

a

 de

dicated

 power source.

- Make sure that the voltage of the power source matches that on the label.
- Product label is on the back side of the product.
- Wrong voltage poses risks of fire

electric shock a

nd

 

product

malfunction

.

- Make sure that the voltage is correct when 

moving

 the product

to a new 

location

.

Required for proper operation

Содержание KOOL-IT KCU-180-AH





































Отзывы: