MVP KOOL-IT KCU-180-AH, Руководство пользователя

Страница: 23 / 36

23
Step 5.
While
the
components are soaking into the solution
,
use a soft bristle brush to clean
ice
zone surface of bin. Clean
door interior
, door rail, bin and evaporator mounting
bracket thoroughly and rinse them with clean water.
Step 6. Replace all removed parts after cleaning
Step 7.
Set the switch to
the
WASH position to start automatic cleaning. Water is suppl ied
automatically.
Add
1.35oz
of cleaner to the
w
ater
trough
.(Place the switch in the OFF
position when adding cleaner to the
w
ater
trough.
)
Step 8. Wait until the cleaning cycle is complete(approximately 21 minutes) then place the
switch in the OFF position . Turn the switch back in to the WASH position and
r
epeat the wash cycle
if
cleaner residue
is still present
in the
w
ater
trough
.
Step 9.
Lime scale and mineral deposits
should
disappear when cleaning and rinsing is complete.
If foam is found in the
w
ater
trough
and
the
rinse is complete,
r
epeat step 8
again.
Step 10.
Step 10 is sanitization. This must be done once a month.
Soak a
ll components
from
s
tep 3
in a solution of
1.3 gallons
of sanitizer
and water for 10 minutes
to
sanitiz
e
.
Pour solution over the large r parts. Rinse the parts thoroughly.
Use running tap water only for rins
ing
to prevent contamination.
Air d ry parts , d o not us e a cloth or sponge.
Step 11.
Use
the
solution of sanitizer and water
and with
a cloth or soft bristle brush
clean
the ice
zone surface of bin. Clean bin door, door rail, storage bin
and evaporator mounting bracket thoroughly and rinse with running tap
water to prevent contamination.
Step 12.
Replace the part
s
. Place the switch in OFF position.
Step 13. Set the switch to WASH position to start automatic cleaning.
Water is suppl ied automatically.
Add
1.0oz
of sanitizer to the
w
ater
trough
.
Step 14. Wait until the sanitization cycle is complete (approximately 21 minutes) then place
the switch in the OFF
position
. Turn the switch back
to the
WASH
position
and
r
epeat the sanitiz
ing
cycle wh ile the sanitizer residue is still in the
w
ater
trough
.
Step 15.
Set the switch to the ICE positio
n
.
The i
ce
making cycle will begin.
Discard all ice made in the first cycle. Use ice made from
second cycle.