MAINTENANCE
NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN
DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING.
Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a water hose or any
fluid pressure.
1,
The mixer should be thoroughly cleaned daily .
. ii
!I
i:
,*!
1
Bowls and agitators should be removed from the mixer and cleaned in a sink.
The transmission case and planetary mechanism
should be inspected weekly for leaks, damage, etc.
Should it become necessary to repack the ball bearings, an authorized service technician or the
manufacturer should be contacted. Use of unproved grease of lubricants may lead to damage and void the
. '
..
--
u :ut s warranty.
The
bowl lift slidways
(Figure 1-1) should be lubricated semi-annually, or more often under heavy usage.
Disconnect the unit from the power supply before removing the top housing or apron. The
drip cup
(Figure 1-4)
or safety guard
should be inspected periodically for moisture or lubricant dripping. Remove
the cup and wipe it with a soft cloth.
CLEANING
The mixer should be thoroughly cleaned daily.
Bowls and agitators should be removed from the mixer and cleaned in a sink.
DO NOT use a hose to clean the mixer - it should be washed with a clean damp cloth.
The drip cup (Figure 1-4) should be removed periodically and wiped clean. A large flat blade screwdriver
may be used to remove the drip cup
