push button here
#)
2#5)4"2
%!
+%
20
RES
STO
RE
SE
T
20
Operating Instructions
21
Operating Instructions
Hose Holder
In addition to conveniently
holding your hose, it’s specially
designed to allow the storage of
your floor brush on the telescopic
wand, without crushing the brush
bristles.
Telescopic Wand
It’s easily adjusted to the
desired height. Simply depress
the button, slide the wand to
the desired length, and release
the button for it to lock into
position. Convenient button-lock
mechanisms prevent the wand
from slipping off the hose handle.
Attachment Holder
Made of durable vinyl, it
conveniently holds all your
accessories. Hang it on your hose
holder, to keep all accessories at
hand.
MVaC aTTaChMenTs
MainTenanCe suGGesTiOns MOdule
(M9, M10, M11 and M12 Models)
Your unit is equipped with an
electronic timing board that will
suggest, by the color of the blinking
LED, the type of maintenance that
should be done. These signals are
only suggestions and do not indicate a
problem with your unit. Your central
vacuum will work normally despite
the flashing LEDs. When you initially
connect your unit, the LEDs will be
green and steady.
With bag
Without bag
Blinking green
• Change the bag
• Empty the dust receptacle and clean the permanent filter
Blinking amber
Plant to have your unit checked by an authorized service center soon and:
• Change the bag and check the permanent filter
• Empty the dust receptacle and clean the permanent filter
Blinking red
It is time to have your unit checked by an authorized service center and:
• Change the bag and check the permanent filter
• Empty the dust receptacle and clean the permanent filter
Blinking green / amber / red
The unit requires service.
To reset the electronic timing board
Hold the reset switch for 10 seconds.
Reset
LED
low
voltage
