MV Agusta 2008 F4 312RR 1078, Руководство по ремонту, Страница: 41 / 124

- 11 -
C
Cylinder kit
Head assy assembly
To execute this operation you need the following spe-
cial tool:
A) n° 8000A3406 piston / cylinder plane distance
measuring tool
Place the new gasket on the cylinder plane.
The gasket is of the same thickness of the one instal-
led before if no parts replacement occurred.
If replacement is necessary you’ll need to measure the
piston / cylinder plane distance with the n° 8000A3406
tool, tightening the head nuts at
3
2 N·m. The choice is
made following table below:
The cylinder base gaskets always have the same
thickness (see table).
Distance between piston Type of gasket Code
and cylinder surface ( X )
-0,300; -0,450 mm 0,70 8B00A9370
-0,460; -0,610 mm 0,55 8A00A9370
-0,620; -0,770 mm 0,40 8000A9370
THICKNESS N° ITEM
0,38 mm 8000A9371
Do not position the feeler on the projec-
tion on the piston top.
1 -Gasket thickness
2 -Gasket code
Note : Fit the gasket with the inscriptions facing up.
EXHAUST SIDE
K
3
2 Nm clamping