VideoEase MonoPro XLR Application Guide
© MuxLab Inc. 2005-2006
5
Adding a Cat5 line cord to the balun
In applications where the MonoPro XLR must be connected to a modular RJ45 wall outlet, a
line cord may be added for increased versatility. In order to conform to structured cabling
standards, it is recommended to terminate the twisted pair according to TIA 568 standard as
shown in the diagram below and to use stranded Cat5 UTP and a stranded RJ45 plug.
The following photo shows the MonoPro XLR that has been prepared with an RJ45 line cord.
