DisplayPort 1.2a Fiber Extender Kit
Installation Guide
© MuxLab Inc. 2016
9
Note1:
DO NOT look directly into the LC receptacles of the Transmitter, while it is
powered on, even though this product is strictly regulated to operate under
LASER Class I, classified by CDRH/FDA for eye safety.
Note2:
Units support an extension distance up to 100m using OM3 multimode fiber.
Note3:
Do not make use of any intermediate cable or adapter between these units or
between these units and the end equipment to avoid any undesirable
performance degradation.
a)
Connect the Transmitter directly to the DisplayPort connector of the source
(Computer).
b)
Connect the Receiver directly to the DisplayPort connector of the display.
c)
These units should be connected together with a single length of duplex
multimode fiber cable, while ensuring that the optical LC connector
end-faces are clean.
d)
To ensure proper connectivity, confirm that the Status LEDs on both the
Transmitter and Receiver are ON.
