HDMI 2.0 Fiber Extender Kit
Installation Guide
© MuxLab Inc. 2017
7
4.3 Connection Procedure
a)
Connect the Transmitter to the source equipment (such as a Blu-Ray Player), and
connect the Receiver to the sink equipment (such as a display). Connect the USB
Power Supply to the Receiver. Power on the HDMI source and display. The
Transmitter will be turned on due to the 5V supplied by pin #18 of HDMI interface
of the source. Even though the units are being powered, it is recommended that
the USB Power Supply be used as well for a more stable power source for the
Transmitter, since some sources may not be capable of providing sufficient power.
b)
The Power LED will illuminate when the 500464 is connected to the HDMI
interface of the source and display, and the Status LED will blink three (3) times.
After which the Status LED will blink again once a reliable link is established with
the end equipment.
c)
Connect an LC terminated duplex optical fiber between the Transmitter and
Receiver, where each of the individual fibers are connected as (A) to (A) and (B) to
(B). Ensure the duplex connectors are fully inserted and the top LED will begin to
blink.
Position of the LEDs
