© MuxLab Inc.
94-000807-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment
KVM, HDMI 1.4 & USB 2.0
Devices
KVM, Monitors, TV, PC, laptops, mouse, keyboard.
Transmission
Transparent to the user.
Bandwidth
340 MHz
Signals
HDMI 1.4 protocol and USB 2.0
USB
One input on TX side and 4 outputs on RX side.
Bandwidth available: Up to 250 Mb/s.
Connectors
One (1) HDMI receptacle per TX & RX unit.
One (1) RJ45 for Cat 5e/6 UTP or STP per TX & RX unit.
On TX: 1 standard USB connector, type B.
On RX: 4 standard USB connectors, type A.
Two (2) 3.5mm jacks for IR sensor & emitter per TX & RX unit.
Note: Cables not included.
Maximum Distance
Based on a maximum
length of 6.6ft (2m) of
HDMI cable per end.
Cat 5e/6: 330ft (100m) up to 1920 X 1200 resolution, up to 60Hz
330ft (100m) for 4K (3840 X 2160) up to 30Hz
Note: A minimum CAT5e/6 cable length of 12ft (4m) is required.
When installed in an electrically noisy environment, an STP cable
must be used.
RJ45 Pin
Configuration
Reverse Polarity
Sensitive. Use EIA/TIA
568A or 586B straight-
through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cable required.
Power Supply
Two (2) 110-240V/5VDC power supplies with interchangeable blades
Power Consumption
Transmitter: 3 Watts
Receiver: 7 Watts + USB power
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
Aluminum casting with plastic side panel.
Dimensions
4.50” x 3.00” x 1.25” (11.4 x 7.6 x 3.2 cm)
Weight
2.6 lb. (1.2 kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
2 years
Order Information
500457 HDMI/USB 2.0 Extender Kit
HDMI/USB 2.0 Extender Kit
500457
Quick Installation Guide
Overview
The HDMI/USB 2.0 Extender Kit allows one HDMI 1.4 and one USB 2.0 channel to be
transmitted up to 330ft (100m) at all resolutions up to 1920x1200 @ 60Hz via one (1)
Cat 5e/6 cable in a point-to-point configuration. The receive side includes a 4-port USB
2.0 hub, supporting KVM applications.
Applications
Applications include KMV commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product
labels, see the above front and rear product views for further details.
2.
Verify that the distance between the HDMI/USB 2.0 Transmitter and Receiver is
within MuxLab specifications.
3.
To install the Transmitter:
3a.
Connect the Transmitter to the HDMI video source with a HDMI compliant cable.
3b.
Connect the Transmitter to the USB signal with a standard USB 2.0 cable.
3c.
Connect a Cat 5e/6 (or higher) grade UTP cable of desired length within
specifications to the RJ45 LINK connector on the Transmitter.
