© MuxLab Inc. 2017
4.
Power-on the audio source and receiver. Verify the state of the connection based
on the LED status, see below.
When an HDMI signal is detected on the input, the HDMI In LED will be ON.
When an HDMI signal is detected on the output, the HDMI Out LED will be ON.
When a valid audio signal is processed, the Audio LED will be ON.
5.
The following diagrams show the final configuration.
Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in regard to the installation of the HDMI Audio Extractor with Video Out, Dolby & DTS:
Symptom
LEDs
Probable
Cause
Possible
Solutions
Power HDMI
In
HDMI
Out
Audio
No Video
OFF
OFF
OFF
OFF No power
• Check power connections
No Video
ON
OFF
OFF
OFF Source
• Check the source equipment.
No Video
ON
ON
OFF
OFF Display
• Check the display equipment.
No Sound
ON
ON
ON
OFF Connection
problem, or audio
source invalid or
not supported.
• Check RCA cable connection.
•
Set the audio source to LPCM or
5.1 Bitstream digital audio which
is supporting Dolby digital and
DTS
.
Choppy
sound
ON
ON
ON
ON
Poor Connection.
• Check RCA cable connection.
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).
