HDMI/HDBT 1x4 Splitter
Installation & Operation Manual
© MuxLab Inc. 2016
8
3.2. Rear Panel
No.
Name
Description
1
HDMI Input
Connects to the HDMI source device.
2
Outputs
HDMI: Connects to an HDMI display for monitoring or
cascades to another 500424 device.
RJ45 Link: Four (4) HDBT output ports with
Video/Audio, IR and RS232 support.
3
IR
IR Sensor: Connects to the IR Sensor.
IR Emitter: Connects to the IR Emitter; the IR Signal
is coming from the HDBT Receiver.
IR Cascade: Cascades the IR control signal by
connecting to the IR Sensor input of another 500424.
4
ID Preset
Assigns the ID of the 500424, the ID ranges from 0 to F
(in Hex).
After assigning the ID, restart the 500424 for the ID to
take effect.
5
RS232
Connects from the 3 pin terminal block of the 500424
to the DB9 RS232 port of the controlling device.
Cascade: Cascades the RS232 control signal from
one 500424 to another, using the 3 pin terminal block
of each unit.
Note: Set the communication protocol parameters
correctly and send the RS232 commands as per the
instructions in section 6.
6
EDID
Four positions DIP Switches,
“1” represents ON and “0”
represents OFF. Set the switch as follows to configure
the EDID.
1
2
3
4
5
6
7
