Audio Zone Amplifier 100W
Operation Manual
© MuxLab Inc. 2016
8
3.2. Rear Panel
Figure 2- 2 Rear Panel of Zone Audio Amplifier
No.
Name
Description
1
CONTROL
Ethernet
: Connect to an Ethernet LAN to enable IP control via
a web-based GUI & TCP/IP communication software;
Indicators will blink when connected to a network and
communicating normally.
RS232
: Connect to an RS232 controlling device to enable
serial control.
IR Sensor
: Connect to an IR Sensor to receive infrared signals.
Channel Switcher
: Select STEREO or MONO to enable
2x50W or 1x100W (bridged) operation.
2
INPUTS
There are 3 audio inputs, including 1x 2CH analog (RCA)
audio, 1x 2CH analog (3.5mm) audio and 1x PCM
digital/optical (TosLink) audio
3
OUTPUTS
Cascade
: analog audio cascade output port, available only
when input signal selected is 2CH analog audio
Audio Output
: includes stereo audio (2x50W@8
Ω), or mono
output (1x100W@4
Ω)
4
DC 33V
33VDC, 4A power adapter Input Jack
5
GND
Connect for grounding purposes
Note: When connecting or disconnecting speakers, make sure to disconnect the power
from the Audio Zone Amplifier 100W first to avoid electric shock or damage.
