14
15
5. X-Drone controller
Joystick and S1-S4 switch functions
Left joystick
Up and Down – Throttle / Left and Right – Yaw
Right joystick
Up and Down – Pitch / Left and Right – Roll
S1
1 Normal Flight 2 Not allocated 3 Not allocated
S2
1 Joystick Calibration OK 2 X-Drone and WiFi Range Extender Pairing
3 Calibrating Joystick
(Tilt up)
S3
Related Control to Servo
Stop (Medium)
(Tilt Down)
S4
1 GPS Mode 2 Normal Mode 3 Null (Reserved)
5.1 Switching on the controller
- Insert 4 AA batteries (not provided) into the battery compartment as per positive and
negative directions
- Ensure that the two joysticks are in the centre position. Push switches S1 and S2 to the
top position.
- Push the power switch on the controller to on. The power indicator will turn on and stay
solid red.
Before each use make sure the controller has sufficient battery. If the batteries are low the
controller will make a sound to indicate low power. Please remove the batteries if you do not
intend to use the controller for a long time.
5.2 Controller antenna
To maintain a strong communication between the controller antenna and the X-Drone
receiver antenna please keep the controller antenna pointing towards the sky and ensure
that there are no obstacles between the controller antenna and the X-Drone receiver. You
may lose control of the X-Drone if the antenna is obstructed. Make sure that the smartphone
range extender and smartphone (if applicable) do not block the antenna.
1. Antenna
2. Repeater
3. Smartphone mount
4. S2 3 position switch
5. S1 3 position switch
6. S3 Camera angle control
7. S4 3 position switch
8. Remote control power indicator
9. Photo capture indicator
10.Video recording indicator
11. Battery compartment
12. Left joystick
13. Right joystick
14. Strap hole
15. Stop video button
16. Start video record button
17. Photo capture button
18. Remote control power switch
1
2
3
8
7
9
10
11
12
13
14
15
16
17
18
4
5
6
X-Drone Manual.indd 15
22/07/2015 14:28
