sure that the the red surfaces on the
Safe2go adaptors are fully covered.
Placing the Traveller
· Rotate the push bar to the foot end of
the top frame. This side is indicated
with the marking ‘FEET’.
· Position the Travellerwith its foot end
at the foot end side of the top frame.
This side is indicated with the marking
‘FEET’. You can see your child when
you walk behind the pushchair.
· Place the Traveller fasteners over the
adaptors on the frame.
· Lock the Traveller by moving the carry-
ing handle to the side of the head.
· Ensure that the Traveller is firmly fas-
tened by attempting to lift the car seat
out of the frame.
28
Removing the Traveller
· Turn the lever to adjust the carrying
handle of the traveller and push the car-
rying handle in the vertical position.
· Lift the Traveller by the carrying handle
off the adapters.
Removing the Traveller adaptors
· Remove the adapters by pushing the
two release buttons of the Safe2go
adapters in backward direction
Removing the Safe2go adaptors
· See: “Removing the Safe2go adaptors
(p).” (Safe2go)
Placing the carry cot on the top frame
· See: “Placing the carry cot on the top
frame.” (Safe2go)
English