ValueJet Print Server Operation Manual
6 Software RIP Setting
6-1
6
Software RIP Setting
Change the printer IP address specified for the software RIP to the IP address of computer
with VPS installed.
The method to specify the IP address to the software RIP, refer to the setting method of
each application.
When the protocol such as “FTP” or “LP” is specified in the software RIP setting, the
protocol change other than IP address change may be required. Select
“Raw” or
“RawIP” for this case.
For the process to specify the protocol to software RIP, refer to the setting process for
each application.
NOTE
