MUTOH ValueJet VJ-1628X, Руководство по эксплуатации

Страница: 92 / 358

Before using VJ-1628X OPERATION MANUAL
92 3.5 Loading media
3.5.4 Changing Torque of Roll Media Holder
This section explains how to change the torque setting of the Roll media holder.
The 1 kg torque is usually used. When the media is creased or the print head might have a risk of striking
the media, change to the 4 kg torque.
Follow the procedure below to change the torque setting of the Roll media holders.
1. Rotate the damper knob placed at the Roll media holder (the back left and right of the printer) by 90
degrees while pulling it out.
• When you rotate the damper knob by 90 degrees, it clicks into place. Rotating the damper knob
by 90 degrees alternately changes the 1 kg torque and 4 kg torque.
• Change the torque setting for both of the Roll media holders.
No. Name
1 Media
2 Roll media holder
3 Damper knob
1 2 2
1
2
3
3
2
1