MUTOH UniFixer 65, Руководство пользователя

Страница: 9 / 66

User’s Guide Unifixer 65
Safety instructions
AP-75393 - Revision 1.1 9
1
1.4 Safety instructions
Machines must be installed according to Mutoh’s installation procedure also after
moving machines to another location: maintenance needs to be done according to the
service manual.

To prevent fire or electrical shock, never use a power supply source other than the one
rated for the product in the country where you purchased the product.

Use only the provided power cable. To prevent fire or electrical shock, follow the
instructions below when handling the power cable:

Do not cut or modify the cable.

Do not put heavy objects on the cable.

Do not bend, twist, knot or pull the cable.

Do not wire the cable near equipment that generates heat.

Do not use the cable with any other electrical device

Do not handle the cable with wet hands

Be aware of all caution and warning labels to avoid potentially hazardous situations.

To prevent fire or electrical shock, machines must be connected to a properly grounded
electrical power outlet. Do not connect the power cable to a power strip or a power source
shared by other electrical devices.

Make sure that no foreign substances such as dust etc. are stuck to the power plug.

Make sure that the power plug is firmly inserted to the edge of the power socket.

Do not plug to a multi-socket plug

Do not leave the electric lead in contact with a warm surface.

Do not use extension cord with a small diameter section not corresponding to the power of
the machine

To unplug the machine, disconnect the plug without pulling on the supply lead.

Do not disable any safety precautions systems.

Do not operate the unit unless all parts are mounted.

Do not place the machine in the following areas. Doing so may result in the machine
tipping or falling over and causing injury.

Unstable surfaces

Sloping floors

Areas subject to vibration by other equipment

Do not stand on or place heavy objects on your machine. Doing so may result in the
machine tipping or falling over and causing injury.