MUTOH ROCKHOPPER 48 inch, Руководство по эксплуатации, Страница: 38 / 78

Preparing for a job Operation Instructions Rockhopper Printer
Page
38
AP-75024 Rev. 1.2. – 18/08/2002
Step 8:
Insert 6 ink Eco-Solvent cassettes one by one, respecting the order shown in the
illustration below.
•
Ink cassette slots 1 to 4 respectively destined for Black, Cyan,
Magenta and Yellow are coded so that the ink cassettes cannot be
malpositioned.
•
Slots 5 and 6 however are NOT CODED. Please check carefully not
to put the ink cassettes into an incorrect slot.
All RIP software drivers developed according to Mutoh guidelines
require:
Slot 5 to contain: Light Cyan or Orange
Slot 6 (leftmost slot) to contain: Light Magenta or Green
•
Only in very special applications it might be needed to introduce the
cassettes using another order. In this case carefully follow the
instructions given in the application software user guide.
Step 9:
After having installed the ink cassettes, the printer will display the following message:
Step 10:
After this message, automatic ink replenishment begins.
The “ink refill” message means that ink is being filled into the ink supply system (
head). The printer is now ready to print.
Caution:
•
During ink replenishment, never cut off the electricity. This may cause
damage to your printer.
•
In case of a power failure during ink replenishment, proceed as
follows:
1. Switch off the unit (Power Switch) and check to restore the power.
2. Switch on the unit and check that it gives no error messages in the
display.
3. Perform a cleaning cycle and check the test plots.
4. Repeat step 3 until plot quality is acceptable.
User no media
Ink Refill rest 1 M