INCLUDED ITEMS:
1 left and 1 right
Signal
®
mirror
1 left and 1 right wire harness
2 wire taps
2 foam wrappers
2 housing connectors
2 ring connectors
1 instruction manual
8 cable ties (Not Required)
1 dielectric grease (Not Required)
REQUIRED TOOLS:
Ratchet with extension or ratcheting screwdriver
11mm socket
Socket wrench
T-25 Torx wrench
Large slotted screwdriver
Small slotted screwdriver
Large Phillips screwdriver
Small Phillips screwdriver
Small pry bar
Gopher rod (wire)
Electrical tape
Wire crimper and stripper
Needle nose pliers
Multimeter or wire tester
Sturdy gloves
Safety glasses or goggles
Utility knife
PROBLEMS OR QUESTIONS?
Technical Assistance is available by calling
Muth Mirror Systems Technicians at:
1-800-844-6616
Monday through Friday
Between 8:00 a.m. and 5:00 p.m. CST
Or through the Muth web site:
www.muthco.com
Or via E-mail:
Please read instructions prior to installation.
2
PROFESSIONAL INSTALLATION RECOMMENDED
Warranty does not cover damage to the vehicle or mirror housing due to improper installation. Muth Mirror Systems, LLC (MMS)
assumes no responsibility with regard to the accuracy of this information. MMS assumes no liability or responsibility resulting from
improper installation, even in reliance upon this information. Proper installation is the responsibility of the installer. It is your
responsibility to verify any circuit before interfacing with it using a digital multimeter.
