11
1
3
4
2
USE THE INCLUDED WIRE TAPS AND FOLLOW THE FOUR STEPS ABOVE TO SPLICE INTO THE TURN INDICATOR WIRES
A. Make sure the harnesses are routed securely and enough slack is left for splicing.
B. Splice the RED wire from the driver side harness into the wire previously labeled ‘driver side indicator’.
C. Splice the RED wire from the passenger side harness into the wire previously labeled ‘passenger side indicator’.
D. Activate each turn indicator to verify that the
Signal
®
mirrors are working properly.
E. Reconnect all original wiring. Turn the ignition power to on, check to verify all features are working properly.
F. Replace the plastic door frame moldings, trim, door panels, and all accessories.
