Mutable Instruments Edges, Руководство пользователя

Страница: 3 / 5

Hold one of the 4 WAVEFORM SELECT switches to modify this channel’s options. Leds 3 and 4 will blink.
Press 1 to enable/disable semitone quantization on this channel. Led 1 indicates whether the quantizer is
enabled.
Press 2 to enable/disable the sequencer. Led 2 indicates whether the sequencer is enabled. Hold any one
of the 4
WAVEFORM SELECT switches to exit the settings mode.
Hold one of the 4 WAVEFORM SELECT switches to select the channel in which you want to record a
sequence. Leds 3 and 4 will blink.
Press 3 to start recording. Led 1 lights on to indicate the active step (step 1). Set the FREQ control on the
selected channel to the desired note; or enter a note from your CV keyboard or through your MIDI-CV
interface. Press the second switch to continue to the next step. Set the
FREQ control on the selected
channel to the desired note for the second step. Press the third switch to continue, etc. To stop recording,
press the currently active step. For example, to record a 6 step sequence:
Press 3 to start recording. The sequencer starts at step 1. 1.
Set CV 2.
Press 2 3.
Set CV 4.
Press 3 5.
Set CV 6.
Press 4 7.
Set CV 8.
Mutable Instruments | Edges
3 of 5