Selecting an object
Press
S1
to repeatedly cycle through the different types of items that can be loaded/
written from/to the memory card:
•
pt N patch
will load/save all the sound synthesis settings, but not the sequencer/
arpeggiator parameters of the Nth part.
•
pt N sequence
will load/save all the sequencer/arpeggiator settings of the Nth part.
•
pt N program
will load/save all the settings of the Nth part (synthesis, arpeggiator
and sequencer).
•
multi
will load/save all the settings of all parts.
Remember that you can hold
S1
while turning the encoder to change the active part.
Ambika can store 3328 (26 banks of 128) patches/sequences/programs/multis.
Loading programs/multis/sequences/patches
Turn the encoder to move to the previous/next program. Remember that you can hold
S8
while turning the encoder to scroll faster in the list. To change the current bank:
•
Click the encoder. The bank letter starts blinking.
•
Turn the encoder to select a bank.
•
Click the encoder when you are done.
Reinitializing programs/multis/sequences/patches
Press
S2
(*init* command) to reinitialize or randomize the select object. This brings the
following confirmation page:
pt 1 program [ randomize ]
| init | send | save | version
yes | no
Turn the encoder to select an action (randomize will replace all settings by random values;
while initialize will replace all settings by the values they had at startup). Press
S7
to
confirm, or
S8
to cancel the initialization.
34
