3. Configure IP Camera to Wi-Fi Connection
If needed, you can configure camera connected by net cable to Wi-Fi connection.
From
Camera
page and click
, choose
Advance Config
and then
Wi-Fi
Config
.
Choose a target Wi-Fi Network and input password, and then disconnect net
cable when the camera starts initialization. After initialized, the camera will switch
to Wi-Fi connection in 60 seconds.
Note:
1) Please make sure that the target Wi-Fi Network works normally and you
have access to it (password is correct); otherwise the Wi-Fi configuration will
fail (although the camera will initialize too), and you need to configure again.
2)
The interface of iOS and Android maybe different slightly.
Then back to
Camera
page, the added camera will list there, and you can start
live video now (see point-4).
