Information: The carbon dioxide used to inflate PFDs will
slowly permeate through the fabric cell over time. A slight
reduction of pressure will be observed after several hours of
inflation. Topping up by oral inflation may be required in the
event of very prolonged immersion.
Rearming Your PFD After Manual Inflation
1) Unscrew and inspect the CO2 cylinder. If used or damaged,
discard the CO2 cylinder (Fig 1c).
2) Check the manual lever to ensure it is in the up and ready
position with the green indicator pin properly installed. If the
green indicator pin is missing or damaged, replace it (Fig.
4a).
3) Install an unused CO2 cylinder
by screwing it into the top of
the inflator and hand-tighten.
Do not over-tighten, as this
can damage the internal
gasket.
4) Refold the PFD in accordance
with the repacking
instructions in the Owner’s
Manual.
Your PFD is now ready for use.
p. 6
Fig. 3a
Fig. 4a
Fig. 3b
