musikelectronic geithain TS 53KSP, Инструкция по установке и эксплуатации, Страница: 22 / 32

OPERATION AND CONFIGURATION OF THE DEVICE
20
musikelectronic geithain GmbH TS 53KSP
8.4 Preset menu
The preset menu is at any time accessible by pressing NEXT. The first menu item is LOAD to load a
saved preset. Press NEXT again to go on through the preset menu. Turning the rotary encoder
changes between presets and pressing it down loads the shown preset. Another menu item asks to
confirm the decision by choosing YES and then pressing down the rotary encoder. Choose NO, press
NEXT or BACK to abort the action and return to the Home screen. Preset number one in the device
holds the factory settings. This preset cannot be overwritten so that it is always possible to restore
the factory settings.
Handling the menu item SAVE works in the same way. After choosing a save location, insert a name
for the preset. Chapter “8.6 Entering names and passwords”, page
23 , describes the procedure.
Menu items of the preset menu
After menu item SAVE follows the access level. To choose the LOCKED status, insert a password
according to the user level. In chapter “8.6 Entering names and passwords”, page
23 , is a
description of the procedure.
The last menu item is the information panel. Turn the rotary encoder to browse through items
showing the current hardware version, serial number of the DSP module, software version and the
IP and MAC address of the device.
Save: Load:
Access
Level:
Version Info - SN
Version Info - SW
Version Info - HW
IP Address
MAC Address
Push ENCODER Turn ENCODER NEXT