musikelectronic geithain TS 53KSP, Инструкция по установке и эксплуатации, Страница: 17 / 32

CONTROLS AND CONNECTIONS
15
musikelectronic geithain GmbH TS 53KSP
Rotary encoder (1)
Controls the device and is used to navigate the menu and to set parameters (see chapter “8 Operation
and configuration of the device”, page 19).
LCD display (2)
A 2 × 20 digits display shows user interactions and status. During action it could be dimmed or even
shut down.
NEXT button (3)
Controls the device and is used to navigate the menu and to set parameters (see chapter “8 Operation
and configuration of the device”, page 19).
BACK button (4)
Controls the device and is used to navigate the menu and to set parameters (see chapter “8 Operation
and configuration of the device”, page 19).
LED-level indicator (5)
Indicates the level on the device in case of limiting or clipping.
Ethernet port 10/100 Mbit/s RJ45 (6)
Configuration interface for remote access with ME Geithain DSP Control through a standard TCP/IP
network.
Analogue and AES/EBU connectors XLR3 (7)
Connection to analogue or digital audio devices.
LINE In-/Output XLR3 F/M (8)
Symmetrical in and / or output connectors, for input signals up to + 6 dBu.
On/Off switch (9)
This switch disconnects mains and completely turns off the device.
USB port type B (10)
Used to configure the device with the software ME Geithain DSP Control.
Mains supply with Powercon In/Out (11)
Connection to mains and the possibility to power up another speaker with max. 15 A.
Fuse carrier (12)
Fine wire fuse with 5 A T, 6,3 × 32 mm, turn left to lock, turn right to release.