KǁŶĞƌ͛ƐDĂŶƵĂů
DualLINK MIDI System
Rev. 1.5
Pag. 16 di 47
MIDI
The MIDI button on the numeric keyboard panel enables you to decide how to
control an external expander.
Pressing the MIDI button, enables you to decide on which channels the MIDI
output will be activated and/or deactivated.
WARNING: this button must be
pressed a little longer to activate the MIDI output.
Pressing the MIDI key will make the following display appear:
In effect, the display that appears enables you to select which sections of the
instrument you want to programme (Right, Bass, Chord), both on MIDI A and
MIDI B (since each section can transmit two summable MIDI channels), and
the transmission channel can be selected using the +/-‐ buttons on the numeric
keyboard panel.
During the programming, according to the key that you have pressed, the +/-‐
buttons are used to change the values. This is a simple modification of the
channel set by default (or already modified in the EDIT section) that will be
immediately active only for transmission of the notes. To change the sound of
the connected MIDI instrument, it will obviously be necessary to select a
preset (or sound) on the MIDI instrument.
In practise, you have the possibility to change the settings of the Performance,
which also in this case will not remain memorized, therefore nothing prevents
you to previously programme Performances with the correct MIDI channels.