RoadRunner
U S E R S G U I D E
30
This display shows the ID number of the named configuration, and
shows the total number of stored configurations. In this example, the
configuration ‘MYOFFICE’ is ID number 5, and it is the second of 7
stored configurations. Remember that the configurations are stored
alphabetically.
When the desired configuration is found, press the
ENTER
key to load it.
Stored Configuration Table Maintenance
The
RoadRunner
is capable of storing up to twenty location specific TA
configurations. Adding new configurations is as easy as saving the
current configuration, as described above. Loading a table entry from
the view menu is as easy as pressing the
ENTER
key once the desired
entry is found. Viewing all of the stored entries is also simple. Load
the configuration using the keypad sequence
<
TA Type
><Recall>
and scroll through the table entries using the left and right arrow keys.
To erase a table entry, or clear the entire table, use the keypad
sequences:
<Maint><TA Cnfgr><Del entry>
or
<Maint><TA Cnfgr><Clear all>
From a terminal use the
CTD
command to clear one or all stored TA
configurations.
Audio I/O and Level Adjustments
The
RoadRunner
contains a three channel audio mixer. Input 3 (rear
panel input) can support both microphone and line level sources, and
the input level is changed with the switch located next to the input
connector. All inputs are balanced, with a maximum input level of -30
dBu for microphones and +18 dBu for line level. You can connect
professional quality, low impedance microphones directly. Phantom
power is not provided, nor are unbalanced inputs. High impedance or
unbalanced microphones will require external matching devices.
Alternatively, you can connect unbalanced sources by connecting hot to
