P a g e
13
Output
Power
330 Watts per channel into 8 Ohms
Voltage
52 Volts RMS, 20Hz to 20 kHz; onset of clipping
147 Volts peak to peak
Current
120 Amps peak to peak
Damping factor
200
Output devices
5 pairs per channel
Line input
THD+N
< 0.005 % typical, 20Hz to 20 kHz
Signal / noise ratio
> 107dB ‘A’-weighted
Input impedance
40 k Ohms
Frequency response
+ 0, –0.1dB, 10Hz to 30 kHz
Connections
Line level inputs
4 pairs line level RCA connectors
1 pair line level balanced XLR connectors
Line level outputs
1 pair line level RCA connectors, constant level LINE outputs
1 pair line level RCA connectors, PREAMP outputs for e.g. biamping
Speaker outputs
2 pairs 4mm banana plug/binding posts
Power requirement
Mains voltages
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption
<0.5W in standby mode (orange LED lit)
130W on and idle (blue LED lit)
900 Watts maximum
Weight
Unit only, unboxed
39 kg (85
4
/
5
lbs)
in shipping carton
47 kg (103
2
/
5
lbs)
Maximum Dimensions
Wide
483 mm (19”)
Height on standard flat feet
187 mm (7
⅓
”)
on pointed feet
212 mm (8
⅓
”)
Deep (front to back) including terminals 510 mm (15¾”)
Standard accessories
IEC type mains lead
10-Amp type
Remote control
Nu-Vista Integrated remote
Batteries
LR03 or AAA, manganese alkaline type 2 off
Felt pads
4 off
Spike Foot
4 off
Spike Foot Cups
4 off
Remote Feet
4 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS
