P a g e
10
BALANCED
To use the
BALANCED
input, connect source balanced outputs to the
BALANCED
input sockets (see page 7).
Select
BALANCED
input by rotating the source select control so
BALANCED
is displayed.
Pressing the corresponding button on the remote handset has the same effect (see page 8).
ILLUMINATIONS
When used in darker environments, for example listening or home theatre rooms. It is possible to switch off
selected features to minimise distraction.
The illumination features (excluding the power/standby LEDs) can be switched on or off by pressing the DISPLAY
button on the front panel.
There is also a corresponding button on the remote control. To cover all options, all 8 permutations are available
for use, tabulated below.
STEP
DISPLAY
BASE ILLUMINATION
VALVE ILLUMINATION
1 (default)
ON
ON
ON
2 OFF ON ON
3 ON OFF ON
4 OFF
OFF ON
5 ON ON
OFF
6 OFF ON OFF
7 ON
OFF
OFF
8 OFF OFF OFF
To select the desired step, simply press the DISPLAY button on the front panel or remote until the required step
is reached. After step 8, the unit reverts back to step 1.
Please note, switching off the unit will store the current step. When next switched on, the remembered setting
will be overridden temporarily until after the initial 12 second mute delay. Once the delay is up, the unit will revert
to normal operation but with the step setting as previously selected.
60.0
.
BALANCED
OPERATION
