Nu-VISTA 300 Power Amplifier
Instructions for Use. Page 7 of 12
USER INFORMATION
INSTALLATION PRECAUTIONS and USER INFORMATION
Your new Nu-Vista 300 is designed and built to provide trouble-free performance but as with all
electronic devices it is necessary to observe a few precautions.
Heed all warnings on the back of the unit.
Only connect the Nu-Vista power supply to a mains outlet of the voltage marked
on the back of the unit.
Position the power supply leads speaker leads and signal interconnects where
they are not likely to walked on or trapped by items placed on them.
Do not use near water.
Do not place the units near direct heat sources such as radiators or other
equipment that producers heat.
Do not place the units where they can be subjected to direct sun light.
Do not remove any covers or try to gain access to the inside. The warranty is
invalid if the units have been tampered with. There are no user adjustments with-
in. Refer all service work to an authorised Musical Fidelity agent
Dust regularly with a soft duster or soft brush but be careful when using cleaning or
polishing agents - they may harm the surface finish.
