RENAMING INPUTS
Issue 2
Page 17 of
42
COAXIAL 1
CD Player
Once the complete name has been typed in; the “RENAME INPUT” button is pressed again to store the input
name.
The renamed input(s) now display the stored name. To rename another input, select that input and repeat the
above process. To change the name of an existing renamed input, simply repeat the above process.
Input renamed
CD Player
CX1
Fixed 44.1kHz
Note: The input names are stored indefinitely; even if unit is switched off and unplugged.
Factory state
The M6 DAC can be reset to factory default. This makes it easy to reset all input names and all level-matched
input settings, as well as erase the paired Bluetooth devices list.
This is implemented by switching to standby, removing mains plug from back. The power on button should then
be held down while the mains plug is re-inserted. When the display is lit up, release the power on button.
Reset factory state?
Yes:
▲
No:
▼
Press
▼
to cancel reset factory state or
▲
to reset all the settings to factory state. Reset factory state briefly
shows
System is now reset
then the unit switches to standby. To switch back on again, press the power/standby button as normal.
