A1 PRO CD
CD SPECIAL FEATURES
Issue 4: 6
th
May 2008
Page 12
of
16
PLAY 1 0:12
repeat track
PLAY 1 0:24
repeat disk
PLAY 7 0:39
repeat shuffle
STOP 74
scan intro
PLAY 1 0:34
repeat a-
PLAY 1 1:55
repeat a-b
STOP 74
program 1 track 0
PLAY 1 0:34
shuffle disc
STOP 74
program 1 track 3
REPEAT PLAYBACK
The
REPEAT
button on the remote control allows the
repeated playback of either one track or all tracks on the
disc.
By pressing the
REPEAT
button once, only the current
track is repeated, and the display shows
If the
REPEAT
button is pressed a second time,
“
repeat disc
” is displayed instead, and the entire disc is
then played repeatedly.
Pressing
REPEAT
a third time cancels repeat mode.
A-B REPEAT PLAYBACK
“A-B repeat” provides the option of playing just a
certain section of the disc over and over again.
Find the beginning of the required section either by
listening, or using the display time as a guide.
When the desired starting point is reached, press button
A / B
on the remote control.
The display will show
When the disc has reached the end of the required
section, press the
A / B
button again, to display and the
unit
continuously plays the selected part of the disc in this
case, the segment of track 1 from 34 seconds to 1 minute
55 seconds.
To cancel A-B repeat mode, press
A / B
on the remote
control.
SHUFFLE PLAYBACK
The SHUFFLE feature allows tracks on the discs to be
played in random sequence rather than the normal
consecutive order.
Tracks are also played in a different order each time the
disc is restarted, or another disc loaded.
This function is obtained by pressing
SHUFFLE
on the
remote control with the unit either stopped or playing. If
the A1 is already playing, play will continue in random
order until all tracks on the disc have been played.
Shuffle play is cancelled by pressing the
SHUFFLE
button a second time. The unit resumes normal play
function, continuing to the end of the disc in normal
order starting from wherever it was left by the previous
random selection.
From stop mode, pressing
PLAY/PAUSE
also begins
shuffle play.
If
REPEAT
is then pressed whilst in shuffle mode, a
repeat shuffle function is obtained
Pressing >
>|
selects the next track in random order.
SCAN INTRODUCTION
The scan-introduction function allows play back of just
the start of each track on the disc, for instance to locate a
preferred track by ear.
Press
INTRO
on the remote control, and if the player
has stopped, the display will show
The first ten seconds (approximately) of each track on
the CD can then be played in sequence by pressing
either
PLAY/PAUSE
on the front panel, or
PLAY
on
the remote control.
Press
INTRO
again to cancel introduction search mode.
If
INTRO
mode is cancelled while the A1 is still
playing, the remainder of the entire disc will be played.
PROGRAMMED PLAY
The built-in program memory allows you to store up to
25 track numbers and then play them back in the held
order. Each track is stored as a “step” in the program.
With the CD loaded and the player stopped, first press
PROGRAM
on the remote control. The following is
then displayed :
On the remote control, press the numeric button of the
track number corresponding to the first track you wish
to store (number 3 for example). That track number will
now appear in the display:
