7
integrated amplifier
integrated amplifier
Using the Remote Control
Note: Install the two AAA batteries, if they haven't been factory installed. To
install/change the batteries; slide the battery cover on the back of the remote
control, off. Install/change the batteries, replace the battery cover and begin
use.
The supplied remote control is a standard system remote and therefore not all
buttons will function with the a50.2. The remote controls the a50.2, cd25.2,
and t25.2. For information on using the remote control with the cd25.2 or
t25.2 please refer to the appropriate manual.
Do not place anything in front of the display area of the unit, or the remote
control may not work.
OPEN/
CLOSE
INPUT
CD
TUNER
ir25.2
1
2
3
4
5
6
7
8
9
0
SCAN
REP /
REP /
MUTING
VOLUME
TUNING
PRESET
PROG /
PROG /
MEM
/
BAND
DIMMER
RANDOM
DISPLAY
power
This button does not function with the a50.2 or cd25.2.
input
Allows you to toggle through the inputs.
muting
Mutes the amp's output. The display will read MUTING when the control is active. Press the
button again and muting is turned off.
display
Dims the display. Press the
button repeatedly to toggle through the settings.
display
volume
Pushing
Increases the volume. Pushing
decreases the volume.
Holding the button increases or decreases the volume rapidly.
volume
volume
