Remote Control Introduction
1
3
6
8
4
7
5
9
2
10
11
1. Standby: power saving standby mode;
2. Mute: Mutes the sound
3~9: Input 1,2,3,4,5, line in, and phono
10~11: /-
Increases or decreases the volume
level.
Note: Install the two AAA batteries supplied
before trying to use your remote control.
The supplied remote control is a standard system
remote and therefore not all buttons will function
with the a15.2. The remote controls both the
a15.2 and the cd15.2. For information on using
the remote control with the cd15.2, refer to the
cd15.2 owner’s manual.
Do not place anything in front of the display area
of the unit, or the remote control may not work.
Basic Operation
On, Off and Standby
1. Turn on or off the unit by pressing the POWER
button on the front panel.
2. Press Standby button on the remote control to
switch into standby mode. The LED will turn red
and all functions will be reduced to a minimum to
make sure that the unit uses minimal power.
Selecting the input source
Turn on the a15.2 and choose the source you want to listen to
.
If you do not know which input has been selected, the LED will indicate.
Note: All inputs are analogue stereo inputs.
1
2
2
1
1. Press the buttons on the remote to select your
desired input or turn the selector knob to your
desired input.
2. Press the VOL+ button to increase
volume and press VOL - to reduce volume.
or, turn the volume control to the right to increase
the volume and turn the volume control to the
left to reduce the volume.
-
9
-
-
8
-
